|
Print Prep and Application -
Application of Coatings
|
Work Room Requirements
An enclosed dust free room or spray booth (such as the one diagrammed, right) is highly recommended.
The use of exhaust fans with the ability to remove excess overspray will keep the room cleaner by preventing excess airborne particles from imbedding into the applied coating.
Temperature and humidity control is also desirable for stable drying of the finished prints. Acceptable ranges are:
Temperature Range 64°F – 80°F (18°C – 26°C) Humidity Range 40%RH – 60%RH
* See Sample Temp/Humidity Gauge Next Page
Page 1 of 26 (Application of Coatings)
|
