|
Clean Up of Eco Print Shield Products |
Clean Up of Eco Print Shield Products
 • Tools may be cleaned with warm soapy water.
• Spray guns need to be cleaned daily.
• Air caps and any dried coating can be cleaned up with Roller and Brush Cleaner (shown, right), available at paint stores and home improvement warehouses.
• Remove excess coating from gun.
• Fill a cup with 1/2” of lacquer thinner or Roller and Brush Cleaner.
• Swirl cleaning fluid around inside of cup several times.
• Spray into disposable rags for 20 seconds.
• Empty and repeat.
• Dispose of the rags immediately.
Warning: Do not leave rags piled up due to the danger of spontaneous combustion.
Click here to learn about Curing Coated Prints
|
|
<< Start < Prev 1 2 Next > End >>
|
| Results 5 - 5 of 5 |
